The Phoenix S is a quick and easy to assemble 4ch sport electric powered glider that's perfect for general and aerobatic flying. The EPO wings are fitted with carbon spars for strength and each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the Volantex fast connect clip system, after flying, simply squeeze the clips to release the wings.

The lightweight, streamlined fuselage is blow moulded from a tough, rugged, and flexible plastic with plywood formers. The EPO horizontal stabiliser and elevator are also reinforced with carbon to improve the strength and stop flutter when flying at high speeds. No glue is required when assembling, the vertical and horizontal stabiliser are simply screwed to the rear of the fuselage.

This is supplied with a pre installed 2212-1400KV brushless motor, pre installed 30A BEC brushless ESC, and 4 pre installed 9g servos. Also supplied is a complete hardware pack which includes a 12x6 folding propeller, propeller adaptor with spinner, horns, push rods, and screws. All the control surfaces are pre hinged using strong plastic hinges to reinforce the foam hinge. The Phoenix S is a strong, rugged, electric powered glider that is stable yet able to perform nice, smooth aerobatics and is perfect for general sports flying.

Wingspan: 63" (1600mm)

Length: 45.7" (1160mm)

Flying Weight: 1.8 lbs (798g)

Motor: BL2212/1400KV brushless motor with folding prop

ESC: Easy Plug 30A brushless ESC

Servo: 9g x 4

 

Needed to complete

4 Channel or more Transmitter and Receiver

7.4V 2S-1500mAh XT60 Li-Po Battery

Battery Charger

4 x AA Batteries for the transmitter

SKU FX-74207-PNP
Brand Volantex

Be The First To Review This Product!

Help other Hobby Works users shop smarter by writing reviews for products you have purchased.

Write a product review